Wholesale Automatic Industrial Rapid Spiral Fast Rolling High Speed Aluminum Door
- Product overview
High speed roller shutter door is an economical fast rolling door with high-speed partition function promoted by our company. The high-speed switch cuts off the air convection inside and outside, which can prevent outsiders from intruding and resist weather changes. The features have insulataion, energy-saving, sealed, efficient, wind-resistant and environmentally friendly. It has a fast and safe opening speed and is suitbale for logistics channels that require frequent high speeds.
The high speed steel roller shutter doors are installed on the top of the door opening, occupies a small top space, and does not hinder the installation and arrangement of pipelines and equipment, such as fire pipes, cable and wires, air pipes, and driving vehicles.
- Dool panel specification
- Regular panel 185mm, thickness 40mm
- Finger protection panel 215mm, thickness 43mm
- 1.2mm hallow panel 185mm, thickness 40mm
- 5cm panel 220mm, thickness 50mm (suitable for the width bigger than 6500mm)
- Control system
- POWEVER: Suitable for the door size less than 40m2
- SNMA: Big power, the tension spring has less elastic force when the door is higher
- Motor speififcation
| Squre meter |
Motor specification |
Speed ratio |
| <9 m2 |
0.75KW |
1:15 |
| 9~20 m2 |
1.5KW |
1:15 |
| 20~25 m2 |
1.5KW |
1:20 |
| 25~40 m2 |
2.2KW |
1:15 |
| 40~50 m2 |
2.2KW |
1:30 |
- Technical characteristics
- Maximum door size: 7000mm*7000mm
- Wind resistance: The wind resistance is 3.5kPa, reaching the national standard level 6; that is, the wind resistance level is 9~12
- Control system: Industrial door special system, high precision encoder to set the opening height of the door, convenient, safe, fast, and fault indication with its own fault detection program. Comply with national electrical safety standards. Special technology is more effective to protect the motor and brake pads. Different speeds can be digitally adjusted according to actual needs. The fast-stop bolts often change to reduce the damage of various parts.
- Door panel: Adopt new-style bridge breaking technology, the panel width is 220mm, the effective width is 217mm, the whole panel thickness is 43mm, the middle polyurethane foam filling, the base plate thickness is 0.8mm, the material is 5 series 5052H32 tensile strength 238N/m2 aluminium gold manganese alloy cold bending molding, the surface adopts fluorocarbon roll coating paint surface 250 um, and the warranty is 20 years without fading.
- Lifting guide rail: Adopt aluminium alloy double spiral turbo guide rail, the door body runs quietly and smoothly. Strong bearing capacity, there is no contact, no friction and no wear betweem the door panel and the connecting parts when running fast and roll up.
- Drive shaft: It adopts a retractable spline drive shaft, which is maintenance-free for life.
- Guiding structure: 1. The surface of the chain shaft is QP treated; 2. Shaft sleeve:Made of PEEK (Polyether ether copper) material.
- Lifting technology: Press the button on the control box nexts to the door to lift the curtain; install a geomagnetic automatic induction system. Can choose to install remote control sensor, blue-tooth sensor control mode. In the event of a power failure, the electronic control system can open the motor brake at any time, and the door can be lifted with the help of the balance system, which can effectively solve the failure of the door due to power failure.
- Product features
- Steel or stainless steel steel frame, beautiful and stable.
- 40Cr shaft with quenching and tempering treatment
- The backside of the panel equips with the hinge
- All panel screws are stainless steel 304
- Spring fixing unit (to ensure the spring won't wind together, and reduce the noise)
- Wiring: The integrate PVC pipe
- High quality PVC materia, composed of high-strength polyethylene coated polyester mesh belt and streamlined glass fiber reinforcement, equipped with aluminium alloy ribs, it can be opened with row windows or open windows.
- Motor: Temperature -sensitive circuit breaker motor protection, motor protection level ≥IP54, equipped with man-machine dialogue interface, absolute value limit technology for the whole range, position closed-loop freqeuency modulation technology, professional drive circuit board hardware control box. Equipped with a standard one-button button with emergency stop switch, and optional: radar induction / geomagnetic ring induction / pull rope swtich / remote start and so on.
- Electronic control system reserved: Infrared safety protection swtich, geomagnetic induction switch, radar induction swtich, rope switch, remote control switch, double door interlock, remote control and other signal interfaces commonly used in engineering transformation, and adopt swtich signal connection incoming, strong compatibility.
- Infrared security: Infrared photoelectric is installed on both sides of the door frame, and there is an object under the fast door to keep the door open; When the door body is lowered, in case the object pass through, the door body will rebound to the opening position, and drop down until there is no obstacle under the door.
- Security system
- Equipped with infrared safety protection electric eyes: there are anti-radio eyes on both sides of the door frame. When there is an obstacle under the fast door, the door body will remain open; when the door body is lowered, an object passes through, the door body will immediately return back to the opening position, and do down until there is no obstacle under the door.
- Bottom safety protection edge: When the door is descending, because the object is in the blind area of the infrared safety protection, when the door is pressed against the obstacle, the door quickly rebounds to the opening position, effectively protecting the objects or pedestrians to avoid any accident.
- Spiral structure
- Round spiral: The circular spiral guide is standard design specifications, sufficient space above the door is the best solution
- Oval spiral: Oval type is the space-saving design, which is used in restricted structural conditions
- Low-header spiral: Lower hearder type is widely used in underground car parking lots
- L type spiral: Used for the area which requires the great depth
- Opening methods
- Motion sensor
- Inductionloops
- Bluetooth
- Pull-cord switch
- Remote control
- Photo eyes
- Safety light curtain
- Safeyt edge
- Other high speed door options
A. PVC fabric high speed door:
PVC high speed rolled shutters is designed for fast operation and insulation required industrial facilities. It has flexibility for different applications also high durability design also suitable for long-term industrial use, flexible and reliable system can be used for many years. It can be applied for many type industries also can be re-design for special conditions of the doors.
B. Stacking high speed door (fold up)
Stacking high speed door is ideal for the divisoin of work areas with high traffic of people and vehicles and the need for quick opening and closing operations, both indoors and outdoors, given its resistance to wind. Its application can be in large openings and in any industrial sector, being important to highlight the improvement in the energy efficiency of the installation due to its actuation speed.
C. Zipper self-repairing high speed door & Thermal insulated zipper high speed door
Self-repairing high speed doors provides a solution for the division of work areas, both indoors and outdoors, with high traffic of people and vehicles requiring rapdi opening and closing operation, due to its self-repairing function, if it receives a blow, the canvas comes out of the guides without suffering any damage, and immediately afterwards, it flies to its original position to continue working as normal.
- Our Professionalism
Our team works in this industry with many years' experience, from the design, manufacture, package, delivery, installation and commissioning, maintenance after-sale service, we provide all-sided supports for our customers at every link, particularly, our technicans can design the suitable door based on the customers' practical demand to save the cost, and provide our customers the effective training to help them operate and maintain the doors properly.
- Package
Qualified plywood for LCL; and Qualified carton or pallet for FLC, however, we are able to provide the package according to your specified requirements.
- Service scope
1. Factory and production online inspection
2. Pre-shipment inspection
3. One year warranty: As long as the goods is received, we will provide one year warranty to supply the accessories free of charge
4. Installation video support: During the installation, we will provide the videos or other documents to help you install the doors successfully, if necessary, we will provide the online guidance.
5. Timle response: Our sales will provide the quick response to help you solve the problem timely.
- About us
WUXI NEWTON TECHNOLOGY CO.,LTD is the manufacturer in the field of all kinds of automatic doors in China, includes automatic folding doors, automatic industrial sectional doors, high speed roll-up doors, garage door, door hardware kit, with a well established reputation for outstanding performance.
Recognized worldwide for its proprieraty design and manufacturing know how. NEWTON has been involved in this industry since 2000. We got here on the basis of providing optimal solutions and strong supports to clients who buy our products.
We understand what our customers need to stay competitive:
- Optimal design for different projects
- At an affordable rate
- In the pastest possible
Meeting these goals requires precision in everything we do, and all stages are controlled strictly by our skilled operators and technicians.
We are proud to offer our high quality automatic doors to the world market. But more importantly, we are pround we've helped our customers meet their demands, to grow their businesses.
Audited Supplier 
){kind=link}
){kind=link}